Lithofin Splash-Stop >W< is a water-based hydrophobic agent specially developed for protecting porous surfaces such as natural stone, concrete, brick, and pavers. The product makes these surfaces water-repellent and reduces their susceptibility to dirt without significantly altering the appearance.
The product penetrates deep into porous surfaces and makes them water-repellent after drying. This repels water and harmful substances, leading to better protection against contamination and easier maintenance.
Lithofin Splash-Stop >W< is suitable for various mineral surfaces such as granite, limestone, sandstone, brick, and concrete stone. It is also suitable for impregnating natural stone indoors and outdoors.
Make sure the surface is clean, dry, and absorbent. Apply the product evenly with a brush, roller, or sprayer. A second coat may be necessary on highly absorbent surfaces, applied wet-on-wet.
The drying time is approximately 30-60 minutes at a temperature of 20°C. The full effect is achieved after 2-3 days.
The consumption depends on the absorbency of the substrate, but it averages between 3 and 25 m² per liter, depending on the material.
Yes, Lithofin Splash-Stop >W< is solvent-free, low-odor, and contains no harmful substances. However, always wear protective gloves and eye protection when applying.
No, the product is not suitable for polished limestone or other non-absorbent surfaces. It works best on absorbent, porous materials.
The protection lasts up to approximately five years, depending on the substrate and exposure. When the effect diminishes, the surface can be treated again.
You can order Lithofin Splash-Stop >W< through our webshop, where we offer a wide range of Lithofin products.
