Information and advice on Dr. Schutz solutions

What Is the Best Way to Oil a Floor with Underfloor Heating? A wooden floor with underfloor heating requires a different approach when applying an oil treatment compared to a floor without heating. The heat from the underfloor system can cause the oil to dry too quickly or absorb unevenly into the wood, leading to color variations and reduced protection. Therefore, it is essential to turn off the underfloor heating before beginning the oil treatment. This prevents the wood from losing moisture too quickly and ensures that the oil is absorbed evenly. Additionally, the room should be well-ventilated, but drafts and direct sunlight should be avoided. The ideal room temperature should remain stable between 18 and 22 degrees Celsius for the best results. Choosing the right oil is also crucial; water-based oils such as Dr. Schutz H2Oil are ideal as they penetrate deeply into the wood without releasing harmful fumes. This ensures that the floor remains well-protected while maintaining its natural appearance. When using Dr. Schutz H2Oil, the underfloor heating must be turned off to ensure even absorption of the oil. Dr. Schutz H2Oil is specially designed for safe and effective treatment of wooden floors, even in combination with underfloor heating. Before applying the oil, the floor must be completely clean and dry. The underfloor heating should be turned off at least 12 hours beforehand to allow the wood’s temperature to stabilize. The oil can then be applied evenly using a polish applicator or a wide mop. It is important to apply thin layers to prevent excess oil buildup, which can leave sticky spots. After oiling, the floor should dry for at least 12 hours before the heating is gradually turned back on. This prevents the oil from hardening too quickly and ensures optimal wood protection. By following these steps, the wooden floor will not only remain beautiful for longer but will also be protected against damage caused by temperature fluctuations.

Cart