HMK S242 Color Enhancer is a ready-to-use, color-enhancing impregnator based on solvents. It prevents the penetration of water and dirt on all natural stone treatments, artificial stone, unglazed tiles, brick, and pavers, both indoors and outdoors.
HMK S242 is suitable for both soft and hard stone, artificial stone, unglazed tiles, brick, and pavers. It can be used on both indoor and outdoor surfaces.
Turn off the underfloor heating and allow the substrate to cool. Thoroughly clean the surface and allow it to dry. Apply HMK S242 evenly with a soft brush or roller and remove excess product before it dries. For high-absorption surfaces, a second treatment after 60 minutes is recommended.
Yes, it is safe to use, but ensure adequate ventilation and wear a respirator when using in enclosed spaces. Avoid contact with rubber, plastic, and other solvent-sensitive materials.
Yes, on low-absorption surfaces, HMK S242 can be diluted with paint thinner at a ratio of 1:10.
The drying time ranges from 4 to 8 hours, depending on temperature and air circulation. Full effectiveness develops within 48 hours.
The consumption depends on the absorbency of the substrate and varies from about 4 to 20 m² per liter.
HMK S242 should be stored in a cool, dry place and is approximately 2 years durable. Keep it out of reach of children.
Excess can be removed within 12 hours with turpentine. After this period, HMK R154 Lösefix can be used to remove excess impregnator.
You can purchase HMK S242 Color Enhancer directly from us via our webshop, where we offer a wide range of stone care products.
